Megasquirt 3 for 4AGE 20V Blacktop

This custom ECU, based on the Megasquirt 3 daughterboard with a knock module, has all the capabilities of the Megasquirt 3. It is synchronized by two VR sensors located in the distributor, 24 teeth + 1 tooth. The trigger for the 4-tooth sensor is not used.
In this configuration, the ECU operates with full sequential injection. The 1-tooth trigger is used as a camshaft sensor and uses port JS10. Use a strobe light to accurately set the ignition timing.
The ignitor output uses the "Ignition A" output. Please note that the Toyota ignitor has a current limit of approximately 5 amps.
The ECU has full knock control with the ability to monitor each cylinder. You can use any knock sensor, not necessarily a Toyota one, as long as it is in good working order.
The ECU detects vehicle speed (VSS1), using input JS7 PE0.
The EGT sensor input is connected and uses input JS4. The "Check" light in the instrument cluster is connected to the IAC1 output. You can assign any response, such as blinking when a certain knock level is exceeded.
The "Catalyst Overheat" light is connected to the IAC2 output. You can assign any action, such as activating the traction control or shift lamp.
The VVT is connected to the V3_INJ2 output.
The charcoal canister (absorber) control is connected to the V3_INJ1 output. A boost valve can be connected instead of the canister.
The FIDLE output is used to control the idle speed control valve.
There is an additional output for controlling the fan relay (blue wire); the IDLE output is used.
A launch control input, a "launch-in" port, is provided.
Any wideband sensor, such as an AEM, can be used for configuration.
The ECU has a Bluetooth module installed (PIN 1234), which is convenient. The connection is more stable than USB. The housing is from a used Toyota ECU, which makes the product much cheaper, but it doesn't look new.
You can use the Megasquirt 3's vast array of features; in essence, you'll have one of the most advanced aftermarket ECUs in your hands.
Megasquirt 3 daughterboard with knock module included.
If you're from Australia or New Zealand, please email me to check delivery options. Free shipping.
You can email me at awd.400@gmail.com